{"id":10265,"date":"2026-07-03T17:39:42","date_gmt":"2026-07-03T17:39:42","guid":{"rendered":"https:\/\/kapdec.com\/help\/?p=10265"},"modified":"2026-07-03T17:39:42","modified_gmt":"2026-07-03T17:39:42","slug":"capacitors-dielectrics","status":"publish","type":"post","link":"https:\/\/kapdec.com\/help\/capacitors-dielectrics\/","title":{"rendered":"Capacitors, Dielectrics"},"content":{"rendered":"
\n
\n

KAPDEC® | Elite STEM Learning Platform | https:\/\/kapdec.com<\/a><\/p>\n

\n

Unit: <\/strong>Conductors, Capacitors, Dielectrics<\/strong><\/h1>\n

Chapter: <\/strong>Capacitors, Dielectrics<\/strong><\/h2>\n

Reference: AP Physics Electricity and Magnetism, Conductors, Capacitors, Dielectrics, <\/em>Capacitor and Capacitance, Effect of Dielectric on Capacitance, Dielectrics and Polarization, Types of capacitors, Combination of Capacitors, Van De Graaff Generator<\/em><\/p>\n

After studying this chapter, you should be able to,<\/strong><\/p>\n

    \n
  • State the definition of Capacitor and Capacitance<\/li>\n
  • Understand the concept of the Effect of Dielectric on Capacitance:<\/li>\n
  • know the concept of a Combination of Capacitors<\/li>\n<\/ul>\n

    Capacitor and Capacitance<\/strong><\/p>\n

    \u2022 Capacitor: <\/strong>The system of two conductors separated by an insulator is called a capacitor.<\/p>\n

    The device which is used to store charge is known as a capacitor. The applied voltage and size of the capacitor decide the amount of charge that can be stored i.e., Q = CV<\/p>\n

    Two similar connecting plates are placed in the capacitor in front of each other where one plate is connected to the positive terminal and the other plate is connected to the negative terminal.<\/p>\n

    \u2022 Capacitance: <\/strong>The ratio of the magnitude of the charge stored on the plate to the potential difference between the plates is called capacitance. It is written as:<\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    Size, shape, medium and other conductors in surrounding influence, the capacitance of a conductor.<\/p>\n

    Its S.I. unit is Farad.<\/p>\n

    1F = 1CV\u20131<\/sup> For a parallel plate capacitor (with a vacuum between the plates),<\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    where A is the area of each plate and d is the separation between the parallel plates.<\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    Effect of Dielectric on Capacitance:<\/strong><\/p>\n

    \u2022 If the medium between the plates of a capacitor is filled with an insulating substance (dielectric), the electric field due to the charged plates induces a net dipole moment in the dielectric. This effect, called polarization<\/em><\/strong>, gives rise to a field in the opposite direction.<\/p>\n

    \u2022 The dielectric is polarised by the field and also the effect is equivalent to two charged sheets with surface charge densities \u03c3p<\/em> \u00a0and -\u03c3p<\/em> .<\/p>\n

    \u2022 The net electric field inside the dielectric and hence the potential difference between the plates is thus reduced. Consequently, the capacitance C increases from its value Co<\/sub> when there is no medium (vacuum), C = KCo<\/sub> where K= \u03b5<\/em>\u03b50<\/em> \u00a0 is the dielectric constant <\/em><\/strong>of the insulating substance.<\/p>\n

    Dielectrics and Polarization:<\/strong><\/p>\n

    \u2022 Dielectrics: <\/strong>A non-conducting substance which has a negligible number of charge carriers unlike conductors is called dielectrics.<\/p>\n

    \u2022 Electric polarization: <\/strong>The difference between induced electric field and imposed electric field in dielectric due to bound and free charges is known as electric polarization. It is written as:<\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    Types of capacitors:<\/strong><\/p>\n

    \u2022 Parallel plate capacitor:<\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    \u2022 Cylindrical capacitor:<\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    \u2022 Spherical capacitor:<\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    Combination of Capacitors<\/strong><\/p>\n

    \u2022 For capacitors in the series combination, the total capacitance C is given by<\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    \u2022 In the parallel combination, the total capacitance C is C = C1<\/sub> + C2<\/sub> + C3<\/sub> …… Cn<\/sub>, where C1<\/sub>, C2<\/sub>, C3<\/sub> …… are individual capacitances.<\/p>\n

    \u2022 Capacitors connected in series have the same charges and when connected in parallel have the same voltage.<\/p>\n

    \u2022 Potential across the capacitor remains the same if the battery is connected but if it is disconnected then the charge remains the same which is stored in capacitor.<\/p>\n

    Electrical Energy Stored in a Capacitor:<\/strong><\/p>\n

    \u2022 The energy U stored in a capacitor of capacitance C, with charge Q and voltage V is<\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    The electric energy density (energy per unit volume) in a region with an electric field is <\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    \u2022 Electric density is alternatively known as electrostatic pressure<\/em><\/strong>.<\/p>\n

    Van De Graaff Generator:<\/strong><\/p>\n

    \u2022 A Van de Graaff generator consists of a large spherical conducting shell (a few meters in diameter).<\/p>\n

    \u2022 There are two pulleys, one at ground level and one at the centre of the shell. Both of them are wounded around by a long and narrow endless<\/p>\n

    belt of insulating material.<\/p>\n

    \u2022 The motor drives the lower pulley which keeps moving this belt continuously.<\/p>\n

    \u2022 At ground level to the top, it continuously carries the positive charge and is sprayed on to it by a brush.<\/p>\n

    Then the positive charge is transferred by it to another conducting brush connected to the large shell.<\/p>\n

    \u2022 After the transferring of the positive charge is done, it spreads out uniformly on the outer surface.<\/p>\n

    It can build a voltage difference of as much as 6 to 8 million volts.<\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    Example: <\/strong>A capacitor of capacity 10\u03bcF is charged to a potential of 400V. When it\u2019s both plates are connected by a conducting wire, the heat generated will be ________<\/p>\n

    Solution: <\/strong>Given, the capacity of the capacitor, \ud835\udc36 = 10 \u00d7 10\u22126<\/sup>\u03bcF<\/p>\n

    Potential \ud835\udc49 = 400volt<\/p>\n

    Stored energy = Heat generated<\/p>\n

    \"\"<\/p>\n

    Source: Kapdec.com<\/p>\n<\/div>\n

    Key Points:<\/strong><\/p>\n

    Capacitors:<\/strong><\/p>\n

      \n
    • A capacitor is a passive electronic component that stores and releases electrical energy.<\/li>\n
    • It consists of two conductive plates separated by a dielectric material.<\/li>\n
    • The plates can be made of various materials, such as metal or conductive polymers.<\/li>\n
    • Capacitors are used in electronic circuits for various purposes, including energy storage, filtering, timing, and coupling.<\/li>\n
    • The capacitance of a capacitor is a measure of its ability to store charge. It is determined by the physical characteristics of the capacitor, such as the area of the plates, the distance between them, and the dielectric material used.<\/li>\n
    • The unit of capacitance is the farad (F), but capacitors are commonly found in smaller units like microfarads (\u00b5F) and picofarads (pF).<\/li>\n
    • Capacitors can be connected in series or parallel to increase or decrease their overall capacitance, respectively.<\/li>\n
    • Capacitors can be polarized or non-polarized. Polarized capacitors, like electrolytic capacitors, have a positive and a negative terminal and must be connected in the correct polarity in a circuit.<\/li>\n
    • Capacitors have various applications, including energy storage in power supplies, smoothing voltage in rectifiers, decoupling in integrated circuits, and timing in oscillators.<\/li>\n<\/ul>\n

      Dielectrics:<\/strong><\/p>\n

        \n
      • A dielectric is an insulating material used between the conductive plates of a capacitor.<\/li>\n
      • It prevents direct electrical contact between the plates while allowing an electric field to form across it.<\/li>\n
      • Dielectrics are typically non-conductive materials like ceramics, plastics, or glass.<\/li>\n
      • The dielectric constant (also known as relative permittivity) is a property of the dielectric material that determines how much electric flux can be stored per unit voltage across the dielectric.<\/li>\n
      • The dielectric constant is a dimensionless value, and it represents the ratio of the capacitance of a capacitor with the dielectric material to the capacitance of the same capacitor with a vacuum (or air) as the dielectric.<\/li>\n
      • Dielectric materials with higher dielectric constants allow for higher capacitance values in capacitors.<\/li>\n
      • Dielectrics also affect the voltage rating and insulation resistance of capacitors.<\/li>\n
      • Dielectrics can be classified as polar or non-polar. Polar dielectrics have permanent electric dipole moments, while non-polar dielectrics do not.<\/li>\n
      • Some common dielectric materials include ceramic (like ceramic capacitors), tantalum oxide (used in tantalum capacitors), aluminium oxide (used in aluminium electrolytic capacitors), polyester, polypropylene, and polyethene.<\/li>\n<\/ul>\n

        <\/p>\n